More Blades / MLCC
Custom MLCC Tungsten Carbide Cutting Blades
Custom tungsten carbide straight blades made to your drawings or samples for laminated ceramic green blocks and single-layer ceramic green sheets in multilayer ceramic capacitor production.
Custom MLCC Blade Requirements
MEIRENTE is your one-stop source for non-standard industrial knives. We manufacture custom MLCC cutting blades to drawings or samples, with blade dimensions and edge configuration matched to the cutting material, blade holder and agreed inspection requirements.
Our MLCC blades serve both ceramic block cutting and single-layer ceramic sheet cutting. The dimensions below are reference configurations, not a fixed catalogue.
- Blade type
- Long straight cutting blade
- Material
- Tungsten carbide
- Manufacturing
- Custom-made to drawings or samples
- Reference lengths
- 163 mm and 180 mm
- Reference width
- 22.4 mm
Ceramic Block and Green Sheet Applications
MLCC ceramic block cutting blades
For cutting laminated ceramic green blocks in MLCC production. Confirm the block thickness, required cutting depth, blade-holder interface and cutting direction when specifying the knife.
Ceramic green sheet cutting blades
For cutting single-layer ceramic green sheets. Confirm the sheet thickness, supporting material, mounting arrangement and required cut before selecting the blade geometry.
The two applications do not automatically use the same blade specification. Match each configuration to its drawing and process requirements.
Reference Dimensions and Configuration
| Length | Width | Available thicknesses |
|---|---|---|
| 163 mm | 22.4 mm | 0.10 / 0.15 / 0.20 / 0.40 mm |
| 180 mm | 22.4 mm | 0.10 / 0.15 / 0.20 / 0.40 mm |
Four thickness options are available for each reference length. Thickness tolerance: 0.005 mm. Confirm the tolerance limits, edge profile, mounting details and application on the approved drawing before ordering.
Need a different specification? Other lengths, widths, thicknesses, edge profiles and mounting details can be reviewed for custom manufacture from your drawing or sample. The reference dimensions and inspection values on this page do not define the full customization range.
Blade Face, Edge and Packing
Inspection and Surface Quality
| Inspection item | Specified value |
|---|---|
| Thickness tolerance | 0.005 mm |
| Straightness | Within 0.008 mm |
| Centering deviation | 0.015 mm |
Inspection covers blade geometry, the cutting edge and the condition of the blade surface. Measurement positions and acceptance criteria are defined in the approved drawing.
- Check straightness and blade centering against the drawing.
- Inspect the edge under magnification for notches and other defects.
- Check that the surface is free of foreign matter.
- Reject blades with fractures, breakage or other damage.
The 0.005 mm thickness tolerance applies to thickness only; it is not a general tolerance for every blade dimension. Other dimensional tolerances and microscopic edge acceptance limits are agreed for the specified configuration.
MLCC Blades for Your Equipment
For new equipment or replacement knives, we review the machine brand and model together with your blade drawing, sample and holder details. Customization is based on the actual mounting interface and cutting process, rather than the equipment brand alone.
Share the blade length, width and thickness, clamping area, edge geometry, cutting depth and material being cut. These details allow the blade configuration and inspection requirements to be agreed for your equipment before manufacture.
Request a Custom MLCC Blade
Send the following information for a drawing-based or sample-based quotation:
- Blade drawing, physical sample or clear sample photographs with dimensions.
- Equipment brand and model, blade-holder details and an existing blade part number if available.
- Application: ceramic block cutting or single-layer ceramic sheet cutting, including material thickness and cutting requirements.
- Required quantity, blade dimensions, tolerance limits and edge inspection criteria.
See our manufacturing and inspection facilities and custom industrial knife manufacturing services for your non-standard blade project.
Related resources include the ceramics and glass cutting guide library, ceramic green tape cutting guide, ceramic green tape sheet slitting guide and MLCC PET release film slitting guide.